Pipework - Pressure Rating Table for Stainless Steel Dairy Tube
Pressure Rating Table for Stainless Steel Dairy TubeEdit
Design Pressure (MPa)Edit
| O.D.
(mm) (inch) |
Wall Thickness (mm) | |||||||||||
| 0.45 | 0.50 | 0.60 | 0.70 | 0.90 | 1.20 | 1.50 | 1.60 | 2.00 | 2.50 | 3.20 | ||
| 4.76
6.35 7.14 7.94 9.52 12.70 15.88 19.05 22.23 25.40 31.75 38.10 44.45 50.80 63.50 76.20 88.90 101.60 127.00 152.40 203.20 254.00 |
3/16
1/4 9/32 5/16 3/8 1/2 5/8 3/4 7/8 1 1¼ 1½ 1¾ 2 2½ 3 3½ 4 5 6 8 10 |
25.7
18.8 16.6 14.8 12.3 9.1 |
28.8
21.1 18.6 16.6 13.7 10.1 8.0 6.7 5.7 5.0 |
35.3
25.7 22.6 20.1 16.6 12.3 9.7 8.1 6.9 6.0 4.8 |
42.1
30.4 26.7 23.8 19.6 14.4 11.4 9.4 8.1 7.0 5.6 4.6 4.0 |
56.6
40.4 35.3 31.4 25.7 18.8 14.8 12.3 10.4 9.1 7.2 6.0 5.1 4.5 3.6 |
81.0
56.6 49.2 43.5 35.3 25.7 20.1 16.6 14.1 12.3 9.7 8.1 6.9 6.0 4.8 4.0 3.4 3.0 |
74.5
64.4 56.5 45.6 32.8 25.6 21.1 17.8 15.5 12.3 10.1 8.6 7.5 6.0 5.0 4.3 3.7 3.0 2.5 1.8 1.5 |
80.9
69.7 61.1 49.2 35.3 27.5 22.6 19.1 16.6 13.1 10.8 9.2 8.1 6.4 5.3 4.5 4.0 3.2 2.6 2.0 1.6 |
80.9
64.4 45.6 35.3 28.8 24.3 21.1 16.6 13.7 11.6 10.1 8.1 6.7 5.7 5.0 4.0 3.3 2.5 2.0 |
45.6
37.0 31.1 26.8 21.1 17.3 14.7 12.8 10.1 8.4 7.2 6.3 5.0 4.1 3.1 2.5 |
35.3
27.5 22.6 19.1 16.6 13.1 10.8 9.2 8.1 6.4 5.3 4.0 3.2 |
Notes to the table of design pressures.Edit
- This data is intended to provide a general guide. It must not be relied upon in the absence of competent professional advice.
- These design pressures have been calculated using the basic formulas of AS 40412006 "Pressure Piping". This code includes provision for various additional factors and must be consulted as appropriate. Note that tubes to specifications ASTM A213, A249 and A269 (and pipe specification A312) are specifically included in AS 4041; other tube specifications (eg ASTM A554 and AS 1528) are not covered by the pressure piping code.
- Alternative piping codes such as ASME B31.3 may give different design pressures.
- Additional factors of safety may need to be applied to the values given in the table, depending upon the application conditions.
- Calculations here are for seamless tube to specifications such as ASTM A213. A weld joint efficiency factor of 85% is usually allowed for standard welded pipe and tube, and allowance made for corrosion or wear loss if appropriate.
- The table gives design pressures at ambient temperature, up to 50°C. Reduced pressures apply at elevated temperatures, which can be calculated using the design strengths given in AS 4041.
- Reduced pressures must be used for 304L and 316L unless these are "dual certified" 304/304L and 316/316L grades.
- Pressures are given in megapascals (MPa). Conversions to other units are:
| to convert | to | multiply by |
| megapascals (MPa) | kilograms/mm² (kgf/mm²) | 0.10197 |
| megapascals (MPa) | bar | 10.00 |
| megapascals (MPa) | kilopascals (kPa) | 1000 |
Limitation of Liability
The information contained in this datasheet is not an exhaustive statement of all relevant information. It is a general guide only.
Pressure Rating Table for Stainless Steel Tube
Revised September 2011
AS 4041 design pressures at ambient temperature.
Seamless tube certified to ASTM A 213M or A269.
Welded tube certified to ASTM A249M (weld joint factor must be applied).
Pressure Rating Tables for Seamless A312 Schedule Stainless Steel PipeEdit
Notes to the tables of allowable working pressures.
1. This data is intended to provide a general guide. It must not to be relied upon in the absence of competent professional advice.
2. These allowable pressures were calculated by the formula given in AS 4041-2006 "Pressure Piping", clause 3.14.3. Other design codes may give different allowable pressures. The original specifications must be consulted for full details.
3. These calculations assume Piping Class 1 so only apply if this level of piping construction quality has been achieved.
4. Calculations are for seamless pipe to specification ASTM A312/A312M. An additional weld joint efficiency factor of 85% must be allowed for standard welded pipe, and allowance made for corrosion or wear loss if appropriate.
5. Grade 304 and 316 design pressures are only valid at temperatures above 538°C if carbon content is 0.04% or higher.
6. Allowable working pressures are given in megapascals (MPa). Conversions to other units are:
LIMITATION OF LIABILITYEdit
| to convert | sssssssssssssssssssss | multiply by |
| megapascals (MPa) | 145.0 | |
| megapascals (MPa) | ksi | 0.145 |
| megapascals (MPa) | kilograms/mm² (kgf/mm²) | 0.10197 |
| megapascals (MPa) | bar | 10.00 |
| megapascals (MPa) | kilopascals (kPa) | 1000 |
The information contained is not an exhaustive statement of all relevant information. It is a general guide only
Stainless Steel Grade TP304 Pipes - ASTM A 312, SeamlessEdit
| Temperature (°C): | 50 | 100 | 150 | 200 | 250 | 300 | 325 | 350 | 375 | 400 | 425 | 450 | 475 | 500 | 525 | 550 | 575 | 600 | 625 | 650 | 675 | 700 | 725 | ||||
| Design Strength (MPa): | 138 | 138 | 138 | 130 | 122 | 115 | 113 | 111 | 110 | 107 | 105 | 103 | 101 | 100 | 97 | 90 | 78 | 64 | 51 | 41 | 33 | 27 | 21 | ||||
| Size | Sch
No |
WT
(mm) |
Allowable Working Pressure (MPa) | ||||||||||||||||||||||||
| DN | NPS | mm | |||||||||||||||||||||||||
| 10 | ⅜ | 17.15 | 10S | 1.65 | 25.4 | 25.4 | 25.4 | 23.9 | 22.4 | 21.1 | 20.8 | 20.4 | 20.2 | 19.7 | 19.3 | 18.9 | 18.6 | 18.4 | 17.8 | 16.5 | 14.3 | 11.8 | 9.4 | 7.5 | 6.1 | 5.0 | 3.9 |
| 17.15 | 40S | 2.31 | 36.9 | 36.9 | 36.9 | 34.7 | 32.6 | 30.7 | 30.2 | 29.7 | 29.4 | 28.6 | 28.1 | 27.5 | 27.0 | 26.7 | 25.9 | 24.0 | 20.8 | 17.1 | 13.6 | 11.0 | 8.8 | 7.2 | 5.6 | ||
| 17.15 | 80S | 3.20 | 53.9 | 53.9 | 53.9 | 50.7 | 47.6 | 44.9 | 44.1 | 43.3 | 42.9 | 41.8 | 41.0 | 40.2 | 39.4 | 39.0 | 37.9 | 35.1 | 30.4 | 25.0 | 19.9 | 16.0 | 12.9 | 10.5 | 8.2 | ||
| 15 | ½ | 21.34 | 5S | 1.65 | 20.0 | 20.0 | 20.0 | 18.9 | 17.7 | 16.7 | 16.4 | 16.1 | 16.0 | 15.5 | 15.2 | 14.9 | 14.7 | 14.5 | 14.1 | 13.1 | 11.3 | 9.3 | 7.4 | 6.0 | 4.8 | 3.9 | 3.0 |
| 21.34 | 10S | 2.11 | 26.1 | 26.1 | 26.1 | 24.6 | 23.1 | 21.8 | 21.4 | 21.0 | 20.8 | 20.3 | 19.9 | 19.5 | 19.1 | 18.9 | 18.4 | 17.0 | 14.8 | 12.1 | 9.7 | 7.8 | 6.3 | 5.1 | 4.0 | ||
| 21.34 | 40S | 2.77 | 35.4 | 35.4 | 35.4 | 33.3 | 31.3 | 29.5 | 29.0 | 28.4 | 28.2 | 27.4 | 26.9 | 26.4 | 25.9 | 25.6 | 24.9 | 23.1 | 20.0 | 16.4 | 13.1 | 10.5 | 8.5 | 6.9 | 5.4 | ||
| 21.34 | 80S | 3.73 | 49.8 | 49.8 | 49.8 | 46.9 | 44.1 | 41.5 | 40.8 | 40.1 | 39.7 | 38.6 | 37.9 | 37.2 | 36.5 | 36.1 | 35.0 | 32.5 | 28.2 | 23.1 | 18.4 | 14.8 | 11.9 | 9.7 | 7.6 | ||
| 20 | ¾ | 26.67 | 5S | 1.65 | 15.8 | 15.8 | 15.8 | 14.9 | 14.0 | 13.2 | 12.9 | 12.7 | 12.6 | 12.2 | 12.0 | 11.8 | 11.6 | 11.4 | 11.1 | 10.3 | 8.9 | 7.3 | 5.8 | 4.7 | 3.8 | 3.1 | 2.4 |
| 26.67 | 10S | 2.11 | 20.5 | 20.5 | 20.5 | 19.3 | 18.1 | 17.1 | 16.8 | 16.5 | 16.4 | 15.9 | 15.6 | 15.3 | 15.0 | 14.9 | 14.4 | 13.4 | 11.6 | 9.5 | 7.6 | 6.1 | 4.9 | 4.0 | 3.1 | ||
| 26.67 | 40S | 2.87 | 28.7 | 28.7 | 28.7 | 27.0 | 25.4 | 23.9 | 23.5 | 23.1 | 22.9 | 22.2 | 21.8 | 21.4 | 21.0 | 20.8 | 20.2 | 18.7 | 16.2 | 13.3 | 10.6 | 8.5 | 6.9 | 5.6 | 4.4 | ||
| 26.67 | 80S | 3.91 | 40.6 | 40.6 | 40.6 | 38.3 | 35.9 | 33.8 | 33.3 | 32.7 | 32.4 | 31.5 | 30.9 | 30.3 | 29.7 | 29.4 | 28.5 | 26.5 | 23.0 | 18.8 | 15.0 | 12.1 | 9.7 | 7.9 | 6.2 | ||
| 25 | 1 | 33.40 | 5S | 1.65 | 12.5 | 12.5 | 12.5 | 11.7 | 11.0 | 10.4 | 10.2 | 10.0 | 9.9 | 9.7 | 9.5 | 9.3 | 9.1 | 9.0 | 8.8 | 8.1 | 7.0 | 5.8 | 4.6 | 3.7 | 3.0 | 2.4 | 1.9 |
| 33.40 | 10S | 2.77 | 21.6 | 21.6 | 21.6 | 20.3 | 19.1 | 18.0 | 17.7 | 17.4 | 17.2 | 16.7 | 16.4 | 16.1 | 15.8 | 15.6 | 15.2 | 14.1 | 12.2 | 10.0 | 8.0 | 6.4 | 5.2 | 4.2 | 3.3 | ||
| 33.40 | 40S | 3.38 | 26.8 | 26.8 | 26.8 | 25.3 | 23.7 | 22.3 | 22.0 | 21.6 | 21.4 | 20.8 | 20.4 | 20.0 | 19.6 | 19.4 | 18.8 | 17.5 | 15.2 | 12.4 | 9.9 | 8.0 | 6.4 | 5.2 | 4.1 | ||
| 33.40 | 80S | 4.55 | 37.4 | 37.4 | 37.4 | 35.2 | 33.0 | 31.1 | 30.6 | 30.0 | 29.8 | 29.0 | 28.4 | 27.9 | 27.3 | 27.1 | 26.3 | 24.4 | 21.1 | 17.3 | 13.8 | 11.1 | 8.9 | 7.3 | 5.7 | ||
| 32 | 1¼ | 42.16 | 5S | 1.65 | 9.8 | 9.8 | 9.8 | 9.2 | 8.7 | 8.2 | 8.0 | 7.9 | 7.8 | 7.6 | 7.4 | 7.3 | 7.2 | 7.1 | 6.9 | 6.4 | 5.5 | 4.5 | 3.6 | 2.9 | 2.3 | 1.9 | 1.5 |
| 42.16 | 10S | 2.77 | 16.8 | 16.8 | 16.8 | 15.9 | 14.9 | 14.0 | 13.8 | 13.5 | 13.4 | 13.1 | 12.8 | 12.6 | 12.3 | 12.2 | 11.8 | 11.0 | 9.5 | 7.8 | 6.2 | 5.0 | 4.0 | 3.3 | 2.6 | ||
| 42.16 | 40S | 3.56 | 22.0 | 22.0 | 22.0 | 20.7 | 19.5 | 18.3 | 18.0 | 17.7 | 17.6 | 17.1 | 16.8 | 16.4 | 16.1 | 16.0 | 15.5 | 14.4 | 12.4 | 10.2 | 8.1 | 6.5 | 5.3 | 4.3 | 3.4 | ||
| 42.16 | 80S | 4.85 | 30.9 | 30.9 | 30.9 | 29.1 | 27.3 | 25.7 | 25.3 | 24.8 | 24.6 | 24.0 | 23.5 | 23.1 | 22.6 | 22.4 | 21.7 | 20.1 | 17.5 | 14.3 | 11.4 | 9.2 | 7.4 | 6.0 | 4.7 | ||
| 40 | 1½ | 48.26 | 5S | 1.65 | 8.5 | 8.5 | 8.5 | 8.0 | 7.5 | 7.1 | 7.0 | 6.8 | 6.8 | 6.6 | 6.5 | 6.4 | 6.2 | 6.2 | 6.0 | 5.6 | 4.8 | 3.9 | 3.1 | 2.5 | 2.0 | 1.7 | 1.3 |
| 48.26 | 10S | 2.77 | 14.6 | 14.6 | 14.6 | 13.7 | 12.9 | 12.2 | 12.0 | 11.7 | 11.6 | 11.3 | 11.1 | 10.9 | 10.7 | 10.6 | 10.3 | 9.5 | 8.2 | 6.8 | 5.4 | 4.3 | 3.5 | 2.9 | 2.2 | ||
| 48.26 | 40S | 3.68 | 19.7 | 19.7 | 19.7 | 18.6 | 17.4 | 16.4 | 16.2 | 15.9 | 15.7 | 15.3 | 15.0 | 14.7 | 14.4 | 14.3 | 13.9 | 12.9 | 11.2 | 9.2 | 7.3 | 5.9 | 4.7 | 3.9 | 3.0 | ||
| 48.26 | 80S | 5.08 | 28.0 | 28.0 | 28.0 | 26.4 | 24.8 | 23.3 | 22.9 | 22.5 | 22.3 | 21.7 | 21.3 | 20.9 | 20.5 | 20.3 | 19.7 | 18.3 | 15.8 | 13.0 | 10.3 | 8.3 | 6.7 | 5.5 | 4.3 | ||
| 50 | 2 | 60.33 | 5S | 1.65 | 6.8 | 6.8 | 6.8 | 6.4 | 6.0 | 5.6 | 5.5 | 5.4 | 5.4 | 5.2 | 5.1 | 5.1 | 5.0 | 4.9 | 4.8 | 4.4 | 3.8 | 3.1 | 2.5 | 2.0 | 1.6 | 1.3 | 1.0 |
| 60.33 | 10S | 2.77 | 11.6 | 11.6 | 11.6 | 10.9 | 10.2 | 9.6 | 9.5 | 9.3 | 9.2 | 9.0 | 8.8 | 8.6 | 8.5 | 8.4 | 8.1 | 7.5 | 6.5 | 5.4 | 4.3 | 3.4 | 2.8 | 2.3 | 1.8 | ||
| 60.33 | 40S | 3.91 | 16.6 | 16.6 | 16.6 | 15.6 | 14.7 | 13.8 | 13.6 | 13.3 | 13.2 | 12.9 | 12.6 | 12.4 | 12.1 | 12.0 | 11.7 | 10.8 | 9.4 | 7.7 | 6.1 | 4.9 | 4.0 | 3.2 | 2.5 | ||
| 60.33 | 80S | 5.54 | 24.1 | 24.1 | 24.1 | 22.7 | 21.3 | 20.1 | 19.7 | 19.4 | 19.2 | 18.7 | 18.3 | 18.0 | 17.6 | 17.5 | 16.9 | 15.7 | 13.6 | 11.2 | 8.9 | 7.2 | 5.8 | 4.7 | 3.7 | ||
| 65 | 2½ | 73.03 | 5S | 2.11 | 7.2 | 7.2 | 7.2 | 6.7 | 6.3 | 6.0 | 5.9 | 5.8 | 5.7 | 5.6 | 5.4 | 5.3 | 5.2 | 5.2 | 5.0 | 4.7 | 4.0 | 3.3 | 2.6 | 2.1 | 1.7 | 1.4 | 1.1 |
| 73.03 | 10S | 3.05 | 10.5 | 10.5 | 10.5 | 9.9 | 9.3 | 8.7 | 8.6 | 8.4 | 8.3 | 8.1 | 8.0 | 7.8 | 7.7 | 7.6 | 7.4 | 6.8 | 5.9 | 4.9 | 3.9 | 3.1 | 2.5 | 2.0 | 1.6 | ||
| 73.03 | 40S | 5.16 | 18.2 | 18.2 | 18.2 | 17.1 | 16.1 | 15.2 | 14.9 | 14.6 | 14.5 | 14.1 | 13.8 | 13.6 | 13.3 | 13.2 | 12.8 | 11.9 | 10.3 | 8.4 | 6.7 | 5.4 | 4.3 | 3.6 | 2.8 | ||
| 73.03 | 80S | 7.01 | 25.3 | 25.3 | 25.3 | 23.8 | 22.4 | 21.1 | 20.7 | 20.4 | 20.2 | 19.6 | 19.3 | 18.9 | 18.5 | 18.3 | 17.8 | 16.5 | 14.3 | 11.7 | 9.4 | 7.5 | 6.1 | 5.0 | 3.9 | ||
| 80 | 3 | 88.90 | 5S | 2.11 | 5.9 | 5.9 | 5.9 | 5.5 | 5.2 | 4.9 | 4.8 | 4.7 | 4.7 | 4.5 | 4.5 | 4.4 | 4.3 | 4.2 | 4.1 | 3.8 | 3.3 | 2.7 | 2.2 | 1.7 | 1.4 | 1.1 | 0.9 |
| 88.90 | 10S | 3.05 | 8.5 | 8.5 | 8.5 | 8.0 | 7.6 | 7.1 | 7.0 | 6.9 | 6.8 | 6.6 | 6.5 | 6.4 | 6.3 | 6.2 | 6.0 | 5.6 | 4.8 | 4.0 | 3.2 | 2.5 | 2.0 | 1.7 | 1.3 | ||
| 88.90 | 40S | 5.49 | 15.8 | 15.8 | 15.8 | 14.9 | 13.9 | 13.1 | 12.9 | 12.7 | 12.6 | 12.2 | 12.0 | 11.8 | 11.5 | 11.4 | 11.1 | 10.3 | 8.9 | 7.3 | 5.8 | 4.7 | 3.8 | 3.1 | 2.4 | ||
| 88.90 | 80S | 7.62 | 22.4 | 22.4 | 22.4 | 21.1 | 19.8 | 18.6 | 18.3 | 18.0 | 17.8 | 17.4 | 17.0 | 16.7 | 16.4 | 16.2 | 15.7 | 14.6 | 12.6 | 10.4 | 8.3 | 6.6 | 5.4 | 4.4 | 3.4 | ||
| 90 | 3½ | 101.60 | 5S | 2.11 | 5.1 | 5.1 | 5.1 | 4.8 | 4.5 | 4.3 | 4.2 | 4.1 | 4.1 | 4.0 | 3.9 | 3.8 | 3.7 | 3.7 | 3.6 | 3.3 | 2.9 | 2.4 | 1.9 | 1.5 | 1.2 | 1.0 | 0.8 |
| 101.60 | 10S | 3.05 | 7.4 | 7.4 | 7.4 | 7.0 | 6.6 | 6.2 | 6.1 | 6.0 | 5.9 | 5.8 | 5.7 | 5.6 | 5.4 | 5.4 | 5.2 | 4.9 | 4.2 | 3.5 | 2.8 | 2.2 | 1.8 | 1.5 | 1.1 | ||
| 101.60 | 40S | 5.74 | 14.4 | 14.4 | 14.4 | 13.5 | 12.7 | 12.0 | 11.8 | 11.5 | 11.4 | 11.1 | 10.9 | 10.7 | 10.5 | 10.4 | 10.1 | 9.4 | 8.1 | 6.7 | 5.3 | 4.3 | 3.4 | 2.8 | 2.2 | ||
| 101.60 | 80S | 8.08 | 20.6 | 20.6 | 20.6 | 19.4 | 18.2 | 17.2 | 16.9 | 16.6 | 16.5 | 16.0 | 15.7 | 15.4 | 15.1 | 15.0 | 14.5 | 13.5 | 11.7 | 9.6 | 7.6 | 6.1 | 4.9 | 4.0 | 3.1 | ||
| 100 | 4 | 114.30 | 5S | 2.11 | 4.5 | 4.5 | 4.5 | 4.3 | 4.0 | 3.8 | 3.7 | 3.6 | 3.6 | 3.5 | 3.4 | 3.4 | 3.3 | 3.3 | 3.2 | 3.0 | 2.6 | 2.1 | 1.7 | 1.3 | 1.1 | 0.9 | 0.7 |
| 114.30 | 10S | 3.05 | 6.6 | 6.6 | 6.6 | 6.2 | 5.8 | 5.5 | 5.4 | 5.3 | 5.3 | 5.1 | 5.0 | 4.9 | 4.8 | 4.8 | 4.6 | 4.3 | 3.7 | 3.1 | 2.4 | 2.0 | 1.6 | 1.3 | 1.0 | ||
| 114.30 | 40S | 6.02 | 13.3 | 13.3 | 13.3 | 12.6 | 11.8 | 11.1 | 10.9 | 10.7 | 10.6 | 10.3 | 10.1 | 10.0 | 9.8 | 9.7 | 9.4 | 8.7 | 7.5 | 6.2 | 4.9 | 4.0 | 3.2 | 2.6 | 2.0 | ||
| 114.30 | 80S | 8.56 | 19.4 | 19.4 | 19.4 | 18.2 | 17.1 | 16.1 | 15.8 | 15.6 | 15.4 | 15.0 | 14.7 | 14.4 | 14.2 | 14.0 | 13.6 | 12.6 | 10.9 | 9.0 | 7.2 | 5.8 | 4.6 | 3.8 | 2.9 | ||
| 125 | 5 | 141.30 | 5S | 2.77 | 4.8 | 4.8 | 4.8 | 4.5 | 4.3 | 4.0 | 3.9 | 3.9 | 3.8 | 3.7 | 3.7 | 3.6 | 3.5 | 3.5 | 3.4 | 3.1 | 2.7 | 2.2 | 1.8 | 1.4 | 1.2 | 0.9 | 0.7 |
| 141.30 | 10S | 3.40 | 5.9 | 5.9 | 5.9 | 5.6 | 5.2 | 4.9 | 4.9 | 4.8 | 4.7 | 4.6 | 4.5 | 4.4 | 4.3 | 4.3 | 4.2 | 3.9 | 3.4 | 2.8 | 2.2 | 1.8 | 1.4 | 1.2 | 0.9 | ||
| 141.30 | 40S | 6.55 | 11.7 | 11.7 | 11.7 | 11.0 | 10.3 | 9.7 | 9.6 | 9.4 | 9.3 | 9.0 | 8.9 | 8.7 | 8.5 | 8.5 | 8.2 | 7.6 | 6.6 | 5.4 | 4.3 | 3.5 | 2.8 | 2.3 | 1.8 | ||
| 141.30 | 80S | 9.53 | 17.3 | 17.3 | 17.3 | 16.3 | 15.3 | 14.4 | 14.2 | 13.9 | 13.8 | 13.4 | 13.2 | 12.9 | 12.7 | 12.5 | 12.2 | 11.3 | 9.8 | 8.0 | 6.4 | 5.1 | 4.1 | 3.4 | 2.6 | ||
| 150 | 6 | 168.28 | 5S | 2.77 | 4.0 | 4.0 | 4.0 | 3.8 | 3.6 | 3.4 | 3.3 | 3.2 | 3.2 | 3.1 | 3.1 | 3.0 | 3.0 | 2.9 | 2.8 | 2.6 | 2.3 | 1.9 | 1.5 | 1.2 | 1.0 | 0.8 | 0.6 |
| 168.28 | 10S | 3.40 | 5.0 | 5.0 | 5.0 | 4.7 | 4.4 | 4.1 | 4.1 | 4.0 | 4.0 | 3.9 | 3.8 | 3.7 | 3.6 | 3.6 | 3.5 | 3.2 | 2.8 | 2.3 | 1.8 | 1.5 | 1.2 | 1.0 | 0.8 | ||
| 168.28 | 40S | 7.11 | 10.6 | 10.6 | 10.6 | 10.0 | 9.4 | 8.8 | 8.7 | 8.5 | 8.4 | 8.2 | 8.1 | 7.9 | 7.8 | 7.7 | 7.4 | 6.9 | 6.0 | 4.9 | 3.9 | 3.1 | 2.5 | 2.1 | 1.6 | ||
| 168.28 | 80S | 10.97 | 16.7 | 16.7 | 16.7 | 15.7 | 14.8 | 13.9 | 13.7 | 13.4 | 13.3 | 12.9 | 12.7 | 12.5 | 12.2 | 12.1 | 11.7 | 10.9 | 9.4 | 7.7 | 6.2 | 5.0 | 4.0 | 3.3 | 2.5 | ||
| 200 | 8 | 219.08 | 5S | 2.77 | 3.1 | 3.1 | 3.1 | 2.9 | 2.7 | 2.6 | 2.5 | 2.5 | 2.5 | 2.4 | 2.3 | 2.3 | 2.3 | 2.2 | 2.2 | 2.0 | 1.7 | 1.4 | 1.1 | 0.9 | 0.7 | 0.6 | 0.5 |
| 219.08 | 10S | 3.76 | 4.2 | 4.2 | 4.2 | 4.0 | 3.7 | 3.5 | 3.4 | 3.4 | 3.4 | 3.3 | 3.2 | 3.1 | 3.1 | 3.0 | 3.0 | 2.7 | 2.4 | 2.0 | 1.6 | 1.3 | 1.0 | 0.8 | 0.6 | ||
| 219.08 | 40S | 8.18 | 9.3 | 9.3 | 9.3 | 8.8 | 8.2 | 7.8 | 7.6 | 7.5 | 7.4 | 7.2 | 7.1 | 7.0 | 6.8 | 6.8 | 6.6 | 6.1 | 5.3 | 4.3 | 3.4 | 2.8 | 2.2 | 1.8 | 1.4 | ||
| 219.08 | 80S | 12.70 | 14.7 | 14.7 | 14.7 | 13.9 | 13.0 | 12.3 | 12.1 | 11.9 | 11.8 | 11.4 | 11.2 | 11.0 | 10.8 | 10.7 | 10.4 | 9.6 | 8.3 | 6.8 | 5.5 | 4.4 | 3.5 | 2.9 | 2.2 | ||
| 250 | 10 | 273.05 | 5S | 3.40 | 3.0 | 3.0 | 3.0 | 2.9 | 2.7 | 2.5 | 2.5 | 2.4 | 2.4 | 2.4 | 2.3 | 2.3 | 2.2 | 2.2 | 2.1 | 2.0 | 1.7 | 1.4 | 1.1 | 0.9 | 0.7 | 0.6 | 0.5 |
| 273.05 | 10S | 4.19 | 3.8 | 3.8 | 3.8 | 3.5 | 3.3 | 3.1 | 3.1 | 3.0 | 3.0 | 2.9 | 2.9 | 2.8 | 2.7 | 2.7 | 2.6 | 2.4 | 2.1 | 1.7 | 1.4 | 1.1 | 0.9 | 0.7 | 0.6 | ||
| 273.05 | 40S | 9.27 | 8.4 | 8.4 | 8.4 | 8.0 | 7.5 | 7.0 | 6.9 | 6.8 | 6.7 | 6.6 | 6.4 | 6.3 | 6.2 | 6.1 | 5.9 | 5.5 | 4.8 | 3.9 | 3.1 | 2.5 | 2.0 | 1.7 | 1.3 | ||
| 273.05 | 80S | 12.70 | 11.7 | 11.7 | 11.7 | 11.0 | 10.4 | 9.8 | 9.6 | 9.4 | 9.3 | 9.1 | 8.9 | 8.7 | 8.6 | 8.5 | 8.2 | 7.6 | 6.6 | 5.4 | 4.3 | 3.5 | 2.8 | 2.3 | 1.8 | ||
| 300 | 12 | 323.85 | 5S | 3.96 | 3.0 | 3.0 | 3.0 | 2.8 | 2.6 | 2.5 | 2.4 | 2.4 | 2.4 | 2.3 | 2.3 | 2.2 | 2.2 | 2.2 | 2.1 | 1.9 | 1.7 | 1.4 | 1.1 | 0.9 | 0.7 | 0.6 | 0.5 |
| 323.85 | 10S | 4.57 | 3.5 | 3.5 | 3.5 | 3.3 | 3.1 | 2.9 | 2.8 | 2.8 | 2.8 | 2.7 | 2.6 | 2.6 | 2.5 | 2.5 | 2.4 | 2.3 | 2.0 | 1.6 | 1.3 | 1.0 | 0.8 | 0.7 | 0.5 | ||
| 323.85 | 40S | 9.53 | 7.3 | 7.3 | 7.3 | 6.9 | 6.4 | 6.1 | 6.0 | 5.9 | 5.8 | 5.7 | 5.6 | 5.4 | 5.3 | 5.3 | 5.1 | 4.8 | 4.1 | 3.4 | 2.7 | 2.2 | 1.7 | 1.4 | 1.1 | ||
| 323.85 | 80S | 12.70 | 9.8 | 9.8 | 9.8 | 9.2 | 8.7 | 8.2 | 8.0 | 7.9 | 7.8 | 7.6 | 7.5 | 7.3 | 7.2 | 7.1 | 6.9 | 6.4 | 5.5 | 4.5 | 3.6 | 2.9 | 2.3 | 1.9 | 1.5 | ||
| 350 | 14 | 355.60 | 5S | 3.96 | 2.7 | 2.7 | 2.7 | 2.6 | 2.4 | 2.3 | 2.2 | 2.2 | 2.2 | 2.1 | 2.1 | 2.0 | 2.0 | 2.0 | 1.9 | 1.8 | 1.5 | 1.3 | 1.0 | 0.8 | 0.6 | 0.5 | 0.4 |
| 355.60 | 10S | 4.78 | 3.3 | 3.3 | 3.3 | 3.1 | 2.9 | 2.7 | 2.7 | 2.6 | 2.6 | 2.5 | 2.5 | 2.5 | 2.4 | 2.4 | 2.3 | 2.1 | 1.9 | 1.5 | 1.2 | 1.0 | 0.8 | 0.6 | 0.5 | ||
| 355.60 | 40S | 9.53 | 6.6 | 6.6 | 6.6 | 6.2 | 5.9 | 5.5 | 5.4 | 5.3 | 5.3 | 5.1 | 5.0 | 4.9 | 4.9 | 4.8 | 4.7 | 4.3 | 3.7 | 3.1 | 2.4 | 2.0 | 1.6 | 1.3 | 1.0 | ||
| 355.60 | 80S | 12.70 | 8.9 | 8.9 | 8.9 | 8.4 | 7.9 | 7.4 | 7.3 | 7.2 | 7.1 | 6.9 | 6.8 | 6.6 | 6.5 | 6.5 | 6.3 | 5.8 | 5.0 | 4.1 | 3.3 | 2.6 | 2.1 | 1.7 | 1.4 | ||
| 400 | 16 | 406.40 | 5S | 4.19 | 2.5 | 2.5 | 2.5 | 2.4 | 2.2 | 2.1 | 2.1 | 2.0 | 2.0 | 1.9 | 1.9 | 1.9 | 1.8 | 1.8 | 1.8 | 1.6 | 1.4 | 1.2 | 0.9 | 0.7 | 0.6 | 0.5 | 0.4 |
| 406.40 | 10S | 4.78 | 2.9 | 2.9 | 2.9 | 2.7 | 2.5 | 2.4 | 2.4 | 2.3 | 2.3 | 2.2 | 2.2 | 2.1 | 2.1 | 2.1 | 2.0 | 1.9 | 1.6 | 1.3 | 1.1 | 0.9 | 0.7 | 0.6 | 0.4 | ||
| 406.40 | 40S | 9.53 | 5.8 | 5.8 | 5.8 | 5.4 | 5.1 | 4.8 | 4.7 | 4.7 | 4.6 | 4.5 | 4.4 | 4.3 | 4.2 | 4.2 | 4.1 | 3.8 | 3.3 | 2.7 | 2.1 | 1.7 | 1.4 | 1.1 | 0.9 | ||
| 406.40 | 80S | 12.70 | 7.8 | 7.8 | 7.8 | 7.3 | 6.9 | 6.5 | 6.4 | 6.2 | 6.2 | 6.0 | 5.9 | 5.8 | 5.7 | 5.6 | 5.5 | 5.1 | 4.4 | 3.6 | 2.9 | 2.3 | 1.9 | 1.5 | 1.2 | ||
| 450 | 18 | 457.20 | 5S | 4.19 | 2.2 | 2.2 | 2.2 | 2.1 | 2.0 | 1.9 | 1.8 | 1.8 | 1.8 | 1.7 | 1.7 | 1.7 | 1.6 | 1.6 | 1.6 | 1.5 | 1.3 | 1.0 | 0.8 | 0.7 | 0.5 | 0.4 | 0.3 |
| 457.20 | 10S | 4.78 | 2.5 | 2.5 | 2.5 | 2.4 | 2.3 | 2.1 | 2.1 | 2.0 | 2.0 | 2.0 | 1.9 | 1.9 | 1.9 | 1.8 | 1.8 | 1.7 | 1.4 | 1.2 | 0.9 | 0.8 | 0.6 | 0.5 | 0.4 | ||
| 457.20 | 40S | 9.53 | 5.1 | 5.1 | 5.1 | 4.8 | 4.5 | 4.3 | 4.2 | 4.1 | 4.1 | 4.0 | 3.9 | 3.8 | 3.8 | 3.7 | 3.6 | 3.3 | 2.9 | 2.4 | 1.9 | 1.5 | 1.2 | 1.0 | 0.8 | ||
| 457.20 | 80S | 12.70 | 6.9 | 6.9 | 6.9 | 6.5 | 6.1 | 5.7 | 5.6 | 5.5 | 5.5 | 5.3 | 5.2 | 5.1 | 5.0 | 5.0 | 4.8 | 4.5 | 3.9 | 3.2 | 2.5 | 2.0 | 1.6 | 1.3 | 1.0 | ||
| 500 | 20 | 508.00 | 5S | 4.78 | 2.3 | 2.3 | 2.3 | 2.2 | 2.0 | 1.9 | 1.9 | 1.8 | 1.8 | 1.8 | 1.7 | 1.7 | 1.7 | 1.7 | 1.6 | 1.5 | 1.3 | 1.1 | 0.8 | 0.7 | 0.5 | 0.4 | 0.3 |
| 508.00 | 10S | 5.54 | 2.7 | 2.7 | 2.7 | 2.5 | 2.4 | 2.2 | 2.2 | 2.1 | 2.1 | 2.1 | 2.0 | 2.0 | 1.9 | 1.9 | 1.9 | 1.7 | 1.5 | 1.2 | 1.0 | 0.8 | 0.6 | 0.5 | 0.4 | ||
| 508.00 | 40S | 9.53 | 4.6 | 4.6 | 4.6 | 4.3 | 4.1 | 3.8 | 3.8 | 3.7 | 3.7 | 3.6 | 3.5 | 3.4 | 3.4 | 3.3 | 3.2 | 3.0 | 2.6 | 2.1 | 1.7 | 1.4 | 1.1 | 0.9 | 0.7 | ||
| 508.00 | 80S | 12.70 | 6.2 | 6.2 | 6.2 | 5.8 | 5.5 | 5.1 | 5.1 | 5.0 | 4.9 | 4.8 | 4.7 | 4.6 | 4.5 | 4.5 | 4.3 | 4.0 | 3.5 | 2.9 | 2.3 | 1.8 | 1.5 | 1.2 | 0.9 | ||
| 550 | 22 | 558.80 | 5S | 4.78 | 2.1 | 2.1 | 2.1 | 2.0 | 1.8 | 1.7 | 1.7 | 1.7 | 1.7 | 1.6 | 1.6 | 1.6 | 1.5 | 1.5 | 1.5 | 1.4 | 1.2 | 1.0 | 0.8 | 0.6 | 0.5 | 0.4 | 0.3 |
| 558.80 | 10S | 5.54 | 2.4 | 2.4 | 2.4 | 2.3 | 2.1 | 2.0 | 2.0 | 1.9 | 1.9 | 1.9 | 1.8 | 1.8 | 1.8 | 1.8 | 1.7 | 1.6 | 1.4 | 1.1 | 0.9 | 0.7 | 0.6 | 0.5 | 0.4 | ||
| 600 | 24 | 609.60 | 5S | 5.54 | 2.2 | 2.2 | 2.2 | 2.1 | 2.0 | 1.8 | 1.8 | 1.8 | 1.8 | 1.7 | 1.7 | 1.7 | 1.6 | 1.6 | 1.6 | 1.4 | 1.3 | 1.0 | 0.8 | 0.7 | 0.5 | 0.4 | 0.3 |
| 609.60 | 10S | 6.35 | 2.5 | 2.5 | 2.5 | 2.4 | 2.2 | 2.1 | 2.1 | 2.0 | 2.0 | 2.0 | 1.9 | 1.9 | 1.9 | 1.8 | 1.8 | 1.7 | 1.4 | 1.2 | 0.9 | 0.8 | 0.6 | 0.5 | 0.4 | ||
| 609.60 | 40S | 9.53 | 3.8 | 3.8 | 3.8 | 3.6 | 3.4 | 3.2 | 3.1 | 3.1 | 3.1 | 3.0 | 2.9 | 2.9 | 2.8 | 2.8 | 2.7 | 2.5 | 2.2 | 1.8 | 1.4 | 1.1 | 0.9 | 0.7 | 0.6 | ||
| 609.60 | 80S | 12.70 | 5.1 | 5.1 | 5.1 | 4.8 | 4.5 | 4.3 | 4.2 | 4.1 | 4.1 | 4.0 | 3.9 | 3.8 | 3.8 | 3.7 | 3.6 | 3.3 | 2.9 | 2.4 | 1.9 | 1.5 | 1.2 | 1.0 | 0.8 | ||
Important - refer to the associated Notes to this table